P0760 Fault Code in Honda: Causes, Symptoms, and Fixes

P0760 = Shift Solenoid “C” – Electrical Malfunction**
This code indicates a fault in the electrical circuit related to Shift Solenoid C in the automatic transmission. The Transmission Control Module (TCM) is unable to properly activate or monitor Solenoid C, which is critical for gear shifting.

Possible Causes:

1. Faulty Shift Solenoid C
2. Open or shorted wiring in the solenoid circuit
3. Dirty, contaminated, or low transmission fluid
4. Bad valve body or internal transmission damage
5. TCM malfunction (rare)

Common Symptoms:

1. Check Engine Light (CEL) ON
2. Erratic or harsh gear shifting
3. Transmission stuck in one gear (limp mode)
4. Poor acceleration or response
5. Slipping gears or failure to engage certain gears

Repair Steps:

1. Check Transmission Fluid – Level and cleanliness
2. Inspect and Test Solenoid “C”
3. Check Wiring & Connectors
4. Remove Valve Body (if needed) and test/replace solenoid
5. Clear the Code and perform a test drive