P0795 Fault Code in Ford: Causes, Symptoms, and Fixes

This code is set when the Transmission Control Module (TCM) detects an issue with the pressure control solenoid “C” circuit. The solenoids regulate hydraulic pressure inside the transmission to ensure smooth gear shifts.

Possible Symptoms

1. Hard or harsh shifting
2. Slipping gears
3. Delayed engagement (Drive/Reverse takes time to engage)
4. Transmission overheating
5. Vehicle stuck in limp mode
6. Check Engine Light (CEL) / Transmission Warning Light

Common Causes

1. Faulty Pressure Control Solenoid “C”
2. Wiring issues (open, short, damaged connectors in the solenoid circuit)
3. Low / dirty / contaminated transmission fluid
4. Clogged transmission fluid passages or filter
5. Faulty transmission pump
6. TCM (Transmission Control Module) fault (rare)

Diagnosis Steps

1. Check transmission fluid
2. Inspect wiring & connectors
3. Test Solenoid “C”
4. Check hydraulic pressure
5. TCM check / reprogramming if all else is fine

Repair / Fixes

1. Replace faulty Pressure Control Solenoid “C”
2. Repair / replace damaged wiring or connectors
3. Perform transmission fluid flush & filter replacement
4. Repair hydraulic passage blockages
5. Replace transmission pump (if pressure is low)
6. In rare cases, repair/replace TCM